70cm Canopy Built Cooker Hood Extractor Fan Carbon Filter

The SIA UC70SI is a stylish, 70cm canopy cooker hood designed for installation on the underside of your kitchen cabinet for a minimal, un-obstructive look. This cooker hood comes with the SIA2 Charcoal filter, so you have everything you need to set it up for internal re-circulation. The carbon filter is used to neutralise odours and smoke particles as the air is drawn up into the unit, before releasing the purified air back into your kitchen. The appliance can be used for external extraction, however, a D1 or D3 ducting kit would need to be purchased separately. Features: 3 Variable speeds, Slider controls, 2 x 4W LED lights, Single fan motor, Ducted or re-circulating installation, 1 x Dishwasher proof grease filter. Accessories: SIA2 filter included with this product for internal re-circulation. Fitting Notes: Please ensure there is enough ceiling height to accommodate the clearance needed between the appliance and the hob. Required height over gas hob (mm): 750. Required height over electric hob (mm): 650. Please note that if the hob manual states the clearance must be greater than the above, this will override these instructions. Technical Specifications: Ducting outlet diameter (mm): 125, Extraction rate (m3/hr): 275, Noise level (dBa): 63, Fuse rating (A): 3, Product dimensions (mm): W700 x D298 x H173, Net / gross weight (kg): 5.4 / 6.5, Power (W): 48, Mains lead length (m): 1. Please note that there is no plug supplied with this product. | SIA 70cm Canopy Built In Cooker Hood Extractor Fan with Carbon Filter in Silver