Subaru 0W 20 Engine Oil 1 Litre

Petrol & diesel engine oil - Euro 4, 5 & 6100% Synthetic Application: High performance 100% Synthetic Fuel Economy Engine Oil specially designed for all generations of petrol SUBARU vehicles, especially those fitted with Petrol engines compliant to Euro 4, 5 & 6 emission regulations requesting a lubricant meeting API SN, API SN-RC, API SN PLUS, API SN PLUS-RC, API SP, API SP-RC or ILSAC GF-5, ILSAC GF-6A standards, in 0W-20 viscosity grade.Fulfils all SUBARU engineering and technical requirements to keep engine genuine warranty.Compatible with catalytic converters. Key Benefits: The SUBARU recommendation requires for the lubricant to fulfil API SN and ILSAC GF-5 standards in order to guarantee fuel economy benefits and perfect durability of SUBARU Petrol engines range. The API SN PLUS and API SP standards are fully backward compatible over API SN requirements and all former API standards. The API SP-RC "Resource Conserving" specification is even more demanding on the energy saving requirements. API SP-RC lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine cleanliness, anti-wear protection and enhanced performance at cold temperature for Fuel Economy savings during the whole oil life span. Besides being backward compatible, compare to API SN and API SN PLUS, the API SP-RC standard provides higher performance and especially adds protection against LSPI for downsized direct injection turbocharged gasoline engines. Based on the API SP for grade 20 lubricants, the ILSAC GF-6A standard is fully backward compatible with the ILSAC GF-5 standard, and is even more severe, particularly on fuel economy criteria. It guarantees compatibility with after-treatment systems and perfect engine protection. Certified API SP-RC / ILSAC GF-6A lubricants are environment friendly and reduce fuel consumption, minimizing green house gases (CO2) emission and achieve extended drain intervals managed by vehicles on-board computer. Recommendations: Drain interval: according to manufacturers’ recommendations and tune to your own use.Do not mix with non-API SP-RC or ILSAC GF-6A compliant lubricants. Specifications: API SERVICE SP-RC ILSAC GF-6a Recommended for Subaru Properties: Viscosity grade SAE J 300 0W-20 Density at 20°C (68°F) ASTM D1298 0.839 Viscosity at 40°C (104°F) ASTM D445 44.8 mm²/s Viscosity at 100°C (212°F) ASTM D445 8.2 mm²/s HTHS viscosity at 150°C (302°F) ASTM D4741 2.6 mPa.s Viscosity Index ASTM D2270 161.0 Pour point ASTM D97 -41.0 °C / -42.0 °F Sulfated Ash ASTM D874 0.85 % weight TBN ASTM D2896 8.3 mg KOH/g Flash point ASTM D92 222.0 °C / 432.0 °F