7100 15W 50 4T Motorcycle Engine Oil 1 Litre

High Performance Motorcycle Lubricant100% Synthetic - Ester Application: High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2, 3 or 4 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe... Recommended for specific DUCATI, KTM, BMW engines requiring SAE 15W-50 viscosity grade oil. Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s… Key Benefits: Protection Ester Technology: Low traction coefficient Ester to minimize engine internal friction losses and improve performance. Synergy of Ester with anti-wear additives and improved shear resistance for improved gear protection and life time. 100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs. Optimized Phosphorus and Sulfur content (JASO MA2 < 1200 ppm) for better operating conditions of catalytic converters. The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test results: Pass FLS> 14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS 14 (outstanding result). Comfort JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1 and MA2. JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three riding modes: Starting, Acceleration and Constant Speed. Recommendations: Drain interval: according to manufacturers’ recommendations and tune to your own use.Can be mixed with synthetic or mineral lubricants. Specifications: API SN API SM API SL API SJ API SH API SG JASO MA2 Properties: Colour Visual Red Viscosity grade SAE J 300 15W-50 Density at 20°C (68°F) ASTM D1298 0.864 Viscosity at 40°C (104°F) ASTM D445 126.5 mm²/s Viscosity at 100°C (212°F) ASTM D445 18.0 mm²/s Viscosity Index ASTM D2270 158.0 Pour point ASTM D97 -30.0 °C / -22.0 °F Flash point ASTM D92 236.0 °C / 457.0 °F TBN ASTM D2896 8.4 mg KOH/g