Wall Mounted Micro Bluetooth Amplifier & 2 Ceiling Speaker Kit Stereo HiFi Music

Wall Mounted Amp and Ceiling Speaker Kit Contents:1x 20W Wall Mounted Bluetooth Amplifier 1x IR remote for amplifier 2x White Moisture Resistant Ceiling Speakers Instructions (Speaker cable is not included but can be purchased through our shop)AMPLIFIER IS THE SAME SIZE AS A SINGLE UK PLUG SOCKET / LIGHT SWITCH Overview:Our most compact amplifier yet, this incredibly clever unit can be recess or surface mounted to a wall using a standard single 38mm back box. It is powered directly by the mains meaning no clumsy transformer plugs required and no plug sockets are used. Simply connect a mains cable to the rear of the unit, this will conceal any wiring resulting in a professional finish.The impressive thing about this unit is its versatility, you can hardwire up to 2 source devices to the rear of the unit, insert a Micro SD card / USB drive, listen to FM radio or connect to the amp via a Bluetooth connection (smartphone or tablet) and stream your music wirelessly. You can then connect this amplifier to the supplied speakers (if you want a different amount of speakers, please search our shop or get in touch) and enjoy the rich tones produced by this compact but premium quality Bluetooth amplifier and speaker system. Controlling the amplifier is easy, you can pause/play, skip tracks, adjust volume and more by either pressing the buttons on the front of the unit, using the supplied IR remote or via your Bluetooth enabled device (if you are connected via Bluetooth).PLEASE NOTE This unit only produces 10W per channel and is not designed to be used with speakers in large spaces, it is better suited to kitchens, bathrooms and bedrooms where very loud volumes are not always required. We stock various amplifiers and speaker kits so please get in touch if you require a kit with more power.Features:AMPBluetooth receiver (wireless)2x AUX screw terminal inputs (rear of unit)1x FM terminal input (rear of unit)1x USB media input (bottom of unit)1x Micro SD card media input (bottom of unit)2x Speaker screw terminal outputs (rear of unit)On/Off power switch (bottom of unit)Extremely compact 86mm x 86mm same size as a standard UK light switch plate.SPEAKERS Construction The cones are Constructed from Mylar and Polypropylene with a cloth edge, so as to be unaffected by humidity and moisture, while still providing a lightweight, rigid speaker that provides excellent sound reproduction. They are also moister resistant meaning they can be installed anywhere in your home or at work, even in a bathroom/kitchen.Fitting The speakers are fitted into a 114m cut-out with 65mm of clearance behind. The speakers are very easy to install and are supplied with all the fixings you require.Technical Specification: AMPDimensions 86mm x 86mm x 37mm (WxHxD)Mounting depth 28mm (38mm back box advised)Weight 130gPower Supply 100-230V AC direct mainsPower output Max per channel at 8 Ohms10W (per channel)Bluetooth version 2.1 + EDRFrequency Response 20Hz20kHzCompatible Media Formats MP3, WMA, WAV and FLACSPEAKERS 13cm / 55cm (2") Tweet with Mylar ConeWoofer with Polypropylene cone6mm Spade terminal connectorsBuilt-In CrossoverAll Fixings supplied.2-Way SpeakersMax Power 80wPower RMS 40wFrequency Response 80Hz-18kHzImpedance 8 ohmsMoisture resistant Dual Cone Speaker 130mm diameter, for fitting to a 114mm cut-out / Depth 65mmFurther Information How to install:1) Run all of the cables you need to run before starting the install, this includes mains power cables, speaker cables and any other audio cables (for AUX ports). PLEASE ENSURE THAT ELECTRICITY IS TURNED OFF WHEN INSTALLING. 2) You now need to prepare your wall for the amplifier to be mounted, you will need to cut a hole for this to be recess mounted or use a surface mounted back box (please see Supplied instruction manual for full details).3) Wire the mains power cable and speaker cables to rear of the amplifier via the screw terminal connections. Connect the other end of the speaker cables to the speakers ensuring that you wire positive to positive and negative to negative. 4) You can now power up the unit, select a source and listen to your chosen music.If you are connecting via Bluetooth, simply turn Bluetooth on, on your device (make sure your device is visible under its Bluetooth settings). Then search for compatible devices and your device (phone for example) will find the amplifier. Follow the instructions given to you and you will then be able to play your music / speech wirelessly. If you require anyTechnical Specification or would like to purchase this as part of a kit with speakers / accessories, please feel to get in touch and we will be more than happy to help you.