2x BRUSHED NICKEL Ultra Slim Square Under Cabinet Kitchen Light & Driver Kit Natural Diffused LED

Under Cabinet Led Light and Driver Pack Kit Contents: dia 2x Brushed Nickel Under Cabinet Light 3.5W Natural White LED 1x 8W, 3 Port LED Driver / Transformer Technical Specification: LED Lights Light Casing Colour Brushed Nickel dia Light Colour Appearance Natural White Colour Temperature4000 to 4500 Kelvin Lumens 234lm Colour Wattage 3.5W (per light) Voltage12Vdc (per light) Number of Hours30,000 Lumens per Watt 66.9 Lm/W Beam angle120 Colour Rendering IndexRa 93 Cable Length ( per light)1.5m Colour IP20 Rated Dimensions (per light) 99mm x 99mm x 6.5mm Driver (Power Converter) Voltage12Vdc Colour Wattage 8W Number of Ports3 What is a Driver/Transformer? A driver converts mains voltage (240V AC) to 12V DC. Our range of efficient kitchen lights run on a low voltage, this conserves energy without compromising on brightness. Every light that we sell has a Colour Wattage rating. For example, if you have a light rated at 2.6W and you have 3 of them, your total Colour Wattage consumption would be 7.8W. To put this simply, your drivers Colour Wattage rating must be equal to or greater than 7.8W in order for this to work (pulling through more watts than a driver is rated to will cause the driver to blow). We know that this can sound a little tricky so in order to save you the hassle of working this out, all our light kits include a driver that is specifically designed to work safely and efficiently with your chosen lights. What is a port on the driver? Each driver has a certain number of ports. For example, we sell a 3 port and a 6 port driver in a variety of Colour Wattage s. 1 light will take up 1 port on a driver. If you require 4 lights, you would need a driver with 6 ports as there would not be enough free ports on a 3 port driver. Again, you don't need to worry about this as we have hand crafted all kits with the correct driver, simply select how many lights you require. If you want more lights than are available in our kits, you can either buy another light and driver kit (this gives you the option of having different lights on different switches) or we also sell drivers with different numbers of ports (please search our shop or get in touch for any advice). How to Mount? These lights are designed to be surface mounted under/inside a cabinet. dia First things first, decide on a position for the lights to be installed and drill a small hole (10mm) for the fittings cable to be fed through. This hole should be just behind where the light is fitted (see provided instructions). The light is split into 2 parts, a mounting bracket and the light itself. Mount the bracket to the underside of your cabinet / unit with the 4x supplied fixing screws. The light then sits into the bracket and is held magnetically. Not only does this make them easy to remove for cleaning but it only gives you a completely screwless design ensuring an on-trend and modern finish. dia Now connect the lights to the driver, one light per port. Each light has a 1.5m long cable that connects to the driver but this sometimes isn t long enough for your install. If not, we also sell a 2m and 5m extension cable, perfect for longer runs from the light to the driver. dia The most popular location to install a driver is above the wall units. This ensures the driver is out of sight but easy to access if required. Alternatively, the driver is slim so depending on the depth of your service gap, you can install the driver behind your carcasses. If you are unsure of anything mentioned above, please feel free to get in touch, we will be more than happy to talk you through everything you need to know. dia Features: Ultra Slim Each fitting has a depth of 6.5mm and once installed, will barely be visible depending on the pelmet that you have. However, if this is seen, you can be confident that a sleek and modern fitting will be on show. As they are surface mounted, they are incredibly easy to install, no cutting or recessing required. dia LED Technology Each light features a diffused cover that mimics the appearance of a halogen cabinet with no visible LED points or spots. This ensures that your worktops / unit interiors are adequately and evenly lit. dia Each bulb will last for over 30,000 hours and on average, will last 16 years. After this period the bulbs will only reduce in brightness, meaning they will continue to work. This range offers the latest LED Samsung technology. Further Information : Each light and driver can be sold individually. If you haven t quite found the right pack for your kitchen, please get in touch with your requirements and we will get back to you with a quote for a bespoke bundle ASAP. We sell various dimmers, switches and smart controls (smartphone app) that are suitable to use with this range, please search our shop or feel free to get in touch. Product Code: s329