7530 SPECIAL TEC AA 5W 30 5 Litres

Modern premium class low-friction motor oil that was specially developed for year-round use in Asian and American vehicles. The combination of unconventional base oils using synthetic technology together with the latest additive technology guarantees a motor oil that provides exceptional protection against wear, reduces oil and fuel consumption and keeps the engine clean while ensuring fast oil penetration of the engine. Application: Note the operating instructions of the vehicle and engine manufacturers. Full effectiveness only achieved when the product is not mixed. Areas of Application: Ideal for modern Asian and American gasoline engines with multi-valve technology and turbocharging with and without charge air cooling. Especially suitable where there are long intervals between oil changes and heavy duty engine requirements. Key Benefits: Outstanding engine cleanliness Tested for turbochargers and catalytic converters Optimum oil pressure under all operating conditions Smooth engine running Miscible with all commercially available motor oils Long engine service life Optimum stability to aging High shear stability Outstanding lubrication reliability Instant lubrication after cold start Reduces pollutant emissions Reduces fuel consumption Excellent low temperature behavior Ensures a long service life Recommendations: Chrysler MS-6395 Fiat 9.55535-CR1 Ford WSSM2C 946-A Ford WSS-M2C 946-B1 Ford WSS-M2C 961-A1 Ford WSS-M2C 971-A1 GM 6094 M GM dexos1 Gen 3 GWM HAVAL Honda Hyundai Kia Mazda Nissan Subaru Toyota Wuling Specifications: API SQ ILSAC GF-7A VWC 53034 Properties: Viscosity grade SAE J 300 5W-30 Density at 15°C DIN 51757 0,850 g/cm³ Viscosity at 40°C ASTM D 7042 60,0 mm²/s Viscosity at 100°C ASTM D 7042 10,8 mm²/s Viscosity at -35 °C (MRV ASTM D 4684 < 60000 mPas Viscosity at -35 °C (CCS) ASTM D 5293 ≤ 6600 mPas Viscosity Index DIN ISO 2909 170 HTHS at 150°C ASTM D 5481 > 2,9 mPas Pour point DIN ISO 3016 -39 °C Evaporation loss (Noack) CEC-L-10-A-93 10,5 % Flash point DIN ISO 2592 230 °C Total base number DIN ISO 3771 7,5 mg KOH/g Sulfate ash DIN 51575 0,9 g/100g Color number (ASTM) DIN ISO 2049 L 2,5 Oil base - Advanced Full Synthetic