J RF REMOTE MICROWAVE SENSOR SKU T343X

How to Use this Remote with our Microwave Sensor: • Permanent ON/OFF [button (1)]Press button (1) to select permanent ON or permanent OFFmode.*Press button (2)/(4) to resume automatic operation. The mode will change to AUTO Mode after power failure.• Reset [button (2)]Press button (2), all setting go back to the default settings:Detection range: 100%Hold time: 1minStand-by period: 5 min. Stand-by dimming level: 20%Daylight sensor: LUX disable• Shift [button (3)]Press button(3), the LED on the top left corner will flash toindicate mode selection. All values / settings in RED are valid for 20 seconds.• Auto Mode [button (4)]Press button (4) to initiate automatic mode. The sensorstarts working and all settings remain as before the lightwas switched ON/OFF.• Semi-auto Mode [button (3) & (4)]1. Press button (3) Shift (the red LED is on for indication),2. Press button (4) to initiate semi-auto mode. The fixtureis manually on by push-switch and automatically off insemi-auto mode.• Power Output [button (5)]Press button (5), the light output shifts between 80% and100%. NOTE: The function of "Sensor off" and "Twilight" aredisabled.• Brightness +/- [button (6)]Press button (6) to adjust the light brightness between10%~100%. Features: Permanent ON/OFF Mode: Use button (1) to select permanent ON or permanent OFF mode Auto Mode: Initiate automatic mode by pressing button (4), and all settings remain as before the light was switched ON/OFF Semi-auto Mode: Combine button (3) and (4) for semi-auto mode where the fixture is manually on by a push-switch and automatically off Reset Function: Press button (2) to reset all settings to default values, including detection range, hold time, stand-by period, stand-by dimming level, and daylight sensor Brightness Adjustment: Use button (6) to adjust light brightness between 10% to 100% Specifications: Dimensions: H:20 x W:20 x D:20 cm Weight: 2.5 kg Guarantee: 2 Years Material: 0 Model Number: 5060774553039