SQUHT102 630B 4 3 Qube High Temperature Centrifugal Box Fan Three Phase AC 630mm

The Elta Qube SQUHT102/630B-4-3 is a high temperature centrifugal box fan with a 630mm backward curved impeller in a 1020mm cube casing, rated by Elta for operating temperatures up to +120°C in the duct. It moves up to 19638 m³/h at free air and 15908 m³/h at 500 Pa, the highest pressure in Elta's performance table for this model.The three phase IP55 TEFC motor (380-415V, 4 pole, 1475 rpm) runs at fixed speed direct on line or variable speed from an inverter. The motor sits out of the air stream, so heat, grease and contaminants in the extract do not reach it. The impeller is EN-AW 5754 aluminium, non-overloading and balanced to G6.3, inside an extruded aluminium frame with 25mm double skinned, mineral wool filled panels that can be moved to give a 90° or straight through airflow. Elta give a 12 month warranty. 3 Phase AC Motor Up to 19638 m³/h Speed Controllable What it is best used forHot, greasy or contaminated extract inside the building where the fan sits in the duct run, typically above a ceiling or in a plant room: a factory or warehouse bay, a central production kitchen, a large bakery or forge and foundry extract. Elta list kitchens, restaurants, schools, colleges, shops, shower rooms and factories as typical uses. It moves 19638 m³/h free air and 18115 m³/h against 200 Pa, which is enough for a canopy, grease filters and a reasonable duct run.It is not a smoke extract fan. The +120°C figure is a continuous in-duct running rating, and Elta's datasheet gives no smoke or fire temperature/time rating, so use a certified smoke fan where the design calls for one. It is also not suitable for corrosive or explosive atmospheres. If the air stays below 50°C, the standard Qube SQU range covers the same box sizes without the high temperature build.Why choose this over alternativesThe AC Qube suits a plant room or riser where a simple three phase fan is wanted: it can run fixed speed direct on line, or from Elta's 149-VFD-00-00-0022 inverter when the duty needs trimming. Elta's data show 62.9% overall efficiency at the best efficiency point for this model. If you want built in speed control instead, the Elta SQUHT102/630B-EC-3 is the EC equivalent.For less air, the Elta SQUHT82/560-4-3 gives 11974 m³/h free air.Installation notes The fan can be mounted at any angle. It arrives set up for 90° airflow; move the panels to make it straight through if your duct runs in line. Make sure it is adequately supported, as it weighs 185 kg. Leave access to the panels: they are fixed with multi thread U nuts and lift off for cleaning and maintenance. Elta recommend an inspection at least every 12 months. Wire to Elta diagram 152-613 (delta connection) with a means of isolation. Connect the motor thermal cut-out into the starter control circuit and use a starter or inverter with overload protection, as fuses and breakers only give short circuit protection. Check impeller rotation at first start. Air still comes out of the right side when the impeller turns backwards, but airflow drops and current rises, which harms the motor. Elta warn that the bulkhead and frame can get hot when the fan is handling air at higher temperatures, so keep it clear of anything that could be damaged by heat and guard against contact. You'll also need Elta inverter controller 149-VFD-00-00-0022 (3 phase, IP55) for variable speed. Available to order, ask us. Browse more high temperature fans, commercial box fans or commercial kitchen extractor fans, or call us for help choosing the right fan.Specifications Model SQUHT102/630B-4-3 Type High temperature centrifugal box fan, AC, motor out of airstream Size 630mm impeller, 1020mm box Max airflow 19638 m³/h Static pressure 500 Pa Motor Three phase AC TEFC, 380-415V 50Hz, 4 pole, 1475 rpm, delta connected Power 5.065 kW (9.15 A peak at 400V) Noise 72 dB(A) inlet, 75 dB(A) outlet, 62 dB(A) breakout at 3m IP rating IP55 motor Warranty 1 Year Manufacturer Max air temperature +120°C in duct, operating (not smoke rated) Airflow at 100 Pa 18860 m³/h Airflow at 200 Pa 18115 m³/h Speed control Inverter, Elta 149-VFD-00-00-0022 Inlet / outlet 930mm / 940mm Box dimensions 1020 x 1020 x 1020mm Overall efficiency 62.9% Wiring diagram Elta 152-613 Weight 185 kg Manuals & Guides Elta Qube SQUHT Datasheet Elta Qube SQUHT Installation and Maintenance Manual