SQU67 500 4 3 Qube Centrifugal Box Fan Three Phase AC 500mm

The Elta Qube SQU67/500-4-3 is a centrifugal box fan with a 500mm backward curved impeller in a 670mm cube casing, for supply or extract air up to +50°C. It moves up to 6912 m³/h at free air and 3924 m³/h at 500 Pa, the highest pressure in Elta's performance table for this model.The three phase IP55 TEFC motor (380-415V, 4 pole, 1440 rpm) runs at fixed speed direct on line or variable speed from an inverter. The impeller is EN-AW 5754 aluminium, non-overloading and balanced to G6.3, inside an extruded aluminium frame with 25mm double skinned, mineral wool filled panels that can be moved to give a 90° or straight through airflow. Elta give a 24 month warranty. 3 Phase AC Motor Up to 6912 m³/h Speed Controllable What it is best used forGeneral supply or extract on a ducted system: a shop sales floor, a college workshop, a changing room block or make-up air for a kitchen. Elta list kitchens, schools, colleges, shops, sports halls, factories, industrial units and warehousing among typical uses. It moves 6912 m³/h free air and about 5868 m³/h against 200 Pa; at that 200 Pa figure it gives roughly 10 air changes an hour in a space of about 590 m³.It is the wrong fan for hot extract: the Qube SQU is for an airstream up to +50°C, and Elta state it is not suitable for corrosive or explosive atmospheres. For hot or grease laden kitchen canopy extract, choose a Qube SQUHT high temperature box fan, which keeps the motor out of the air stream and is rated to +120°C in the duct.Why choose this over alternativesThe AC Qube suits a plant room or riser where a simple three phase fan is wanted: it can run fixed speed direct on line, or from Elta's 149-VFD-00-00-0018 inverter when the duty needs trimming. Elta's data show 47.1% overall efficiency at the best efficiency point for this model.For less air, the Elta SQU67/400-4-3 gives 4140 m³/h free air. For more, the Elta SQU82/500-4-3 gives 7704 m³/h.Installation notes The fan can be mounted at any angle. It arrives set up for 90° airflow; move the panels to make it straight through if your duct runs in line. Make sure it is adequately supported, as it weighs 79 kg. Leave access to the panels: they are fixed with multi thread U nuts and lift off for cleaning and maintenance. Elta recommend an inspection at least every 12 months. Wire to Elta diagram 152-611 (star connection) with a means of isolation. Connect the motor thermal cut-out into the starter control circuit and use a starter or inverter with overload protection, as fuses and breakers only give short circuit protection. Check impeller rotation at first start. Air still comes out of the right side when the impeller turns backwards, but airflow drops and current rises, which harms the motor. Elta rate the Qube for ambient temperatures of -20°C to +50°C and up to 95% relative humidity. Site the discharge so it cannot pull flue gases back from any open flued appliance. You'll also need Elta inverter controller 149-VFD-00-00-0018 (3 phase, IP55) for variable speed. Available to order, ask us. Elta electric heater battery 018-RH80/50-18-3TP, if you need to temper supply air. Available to order, ask us. Browse more commercial box fans, commercial extractor fans or Elta fans, or call us for help choosing the right fan.Specifications Model SQU67/500-4-3 Type Centrifugal box fan, AC Size 500mm impeller, 670mm box Max airflow 6912 m³/h Static pressure 500 Pa Motor Three phase AC TEFC, 380-415V 50Hz, 4 pole, 1440 rpm, star connected Power 1.308 kW (2.34 A peak at 400V) Noise 61 dB(A) inlet, 64 dB(A) outlet, 52 dB(A) breakout at 3m IP rating IP55 motor Warranty 2 Year Manufacturer Max air temperature +50°C airstream Airflow at 100 Pa 6336 m³/h Airflow at 200 Pa 5868 m³/h Speed control Inverter, Elta 149-VFD-00-00-0018 Inlet / outlet 600mm / 610mm Box dimensions 670 x 670 x 670mm Overall efficiency 47.1% Wiring diagram Elta 152-611 Weight 79 kg Manuals & Guides Elta Qube SQU Datasheet Elta Qube SQU Installation and Maintenance Manual