SPA560 4 1AC Raptor Plate Axial Fan Single Phase AC 560mm

The Elta SPA560/4-1AC is a 560mm Raptor plate mounted axial fan with a 4 pole single phase motor, moving up to 12578 m³/h in free air and working against static pressures up to 200 Pa. It runs at 63 dB(A) at 3m.It runs on a 220-240V AC external rotor motor at 1350 rpm, insulated to Class F with integral thermal overload protection, drawing 1.15 kW and 5.10 A. The Ziehl-Abegg FE2owlet aerofoil impeller has serrated trailing edges and winglets for lower noise, the motor is weatherproofed to IP54 with an IP55 terminal box, and Elta give a 12 month warranty. 1 Phase AC Motor Up to 12578 m³/h Speed Controllable What it is best used forThrough-wall extract or supply on a single phase supply where noise matters, in warehouses, distribution sheds, factories, sports halls and large industrial units, often as a bank of fans along one wall. At 12578 m³/h it gives about 6 air changes an hour in a space of roughly 2112 m³, for example 33m x 16m with a 4m ceiling.With airflow shown up to 200 Pa it copes with a louvre shutter, cowl or short duct, but for long ducted runs use a cased axial or inline mixed flow fan. It is not suitable for corrosive or explosive atmospheres.Why choose this over alternativesAgainst the Compact Elta SCP560/4-1AC (12056 m³/h, up to 150 Pa, 920 W, 58 dB(A)), the Raptor moves more air and works up to 200 Pa, but is louder. The slower 6 pole Elta SPA560/6-1AC is quieter and cheaper to run (7981 m³/h, up to 100 Pa, 390 W, 52 dB(A)) if you can accept less air.Installation notes Mount the 725 x 725mm fan plate securely at any angle using the four 10mm holes on 670mm centres. Make sure the structure can carry its 28 kg and leave access for maintenance. The motor is prewired to an IP55 terminal box on a flying lead, so the box can be placed to suit the incoming supply. Wire to Elta diagram 152-104B and make all earth connections. Speed can be controlled with the 149-TC110 five step transformer controller. Wire the thermal contacts into the controller circuit as shown on the diagram. Fit a local means of isolation. The AC motor has an auto-reset thermal cut-out, so isolate the supply before any work because the fan can restart on its own once it cools. At first start check impeller rotation and airflow direction, and that the running current does not exceed the rating plate. Inspect and clean blades and guards at least every 12 months. You'll also need Elta 149-TC110 five step transformer controller (10 amp) available to order, ask us Elta 064-0560-C louvre shutter available to order, ask us Elta SWC56/63 wall cowl available to order, ask us Browse more plate axial fans, axial fans or Elta fans, or call us for help choosing the right fan.Specifications Model SPA560/4-1AC Type Plate mounted axial fan Diameter 560mm Max airflow 12578 m³/h Static pressure 200 Pa Motor Single phase AC, 220-240V 50Hz, 4 pole, 1350 rpm Power 1.15 kW (5.10 A) Noise 63 dB(A) at 3m IP rating IP54 motor, IP55 terminal box Warranty 1 Year Manufacturer Airflow at 50 Pa 11686 m³/h Airflow at 100 Pa 10519 m³/h Airflow at 150 Pa 8777 m³/h Airflow at 200 Pa 6779 m³/h Start current 11.00 A Overall efficiency 35.8% FMEG 41.8 Plate size 725 x 725mm Fixing centres 670mm, 4 holes 10mm Weight 28 kg Max air temperature +70°C Wiring diagram 152-104B Manuals & Guides Elta Raptor SPA Datasheet Elta Raptor SPA Installation Manual