SLC560 Revolution Long Cased Axial Fan Single Phase AC 560mm

The Elta SLC560/4A-1AC is a 560mm Revolution long cased axial fan and the smaller motor single phase AC model at 560mm. It moves up to 10922 m³/h at free air and 7204 m³/h against 200 Pa, from a 4 pole single phase AC motor running at 1415 rpm.The casing is heavy gauge steel, hot dip galvanised to BS EN ISO 1461 and suitable for external mounting, with a die cast aluminium aerofoil impeller. The motor is IP55 with sealed for life bearings, wired to an IP55 terminal box on the outside of the case. Elta list no speed controller for this model, so it runs at fixed speed. Elta give a 12 month warranty. 1 Phase AC Motor Up to 10922 m³/h Fixed Speed What it is best used forHigher airflow general ventilation on a single phase supply: sports halls, agricultural buildings, warehouses and workshops, wall mounted or ducted up to 200 Pa. It moves 10922 m³/h at free air, roughly 10 air changes an hour in about 1092 m³.It draws up to 4.15 A and Elta list no speed controller for it, so treat it as fixed speed. At 200 Pa it is down to 7204 m³/h; for variable speed or more pressure on single phase, look at the SLC560-1EC.Why choose this over alternativesThe Elta SLC560/4B-1AC holds more air under load (8950 against 7204 m³/h at 200 Pa) and has a listed transformer controller (149-TC116), for 1.225 kW instead of 0.94 kW.The Elta SLC560-1EC gives 10804 m³/h at full speed with 0 to 10V control and a curve to 350 Pa. If three phase is available, the Elta SLC560/4A-3AC is the efficient choice at 0.76 kW.Installation notes Mount at any angle, horizontally in a duct run or vertically, and make sure the fan is adequately supported: it weighs 45 kg. AV mounts and mounting feet are available from Elta. The flanges are 645mm outside diameter with 12 holes of 12mm on a 620mm PCD. Use Elta matching flanges and flexible connectors to join it to ductwork. Fit a local isolator, and protect the motor with a starter or controller that has overload protection; fuses and breakers only give short circuit protection. Do not use the isolator for day to day on and off control. Wire to diagram 152-502 for 220-240V single phase. Check rotation and airflow direction at first start and that the running current does not exceed the nameplate. Not suitable for corrosive or explosive atmospheres. Inspect and clean the impeller, motor and guards at least every 12 months. You'll also need Elta matching flanges 560mm (061B-0560) (sold each, one per ducted side) Elta APK560/003 ancillary pack (flexible connections, matching flanges, AV mounts and mounting feet in one code; available to order, ask us) Browse more cased axial fans, axial fans or Elta fans, or call us for help choosing the right fan.Specifications Model SLC560/4A-1AC Type Long cased axial fan Diameter 560mm Max airflow 10922 m³/h Static pressure 200 Pa Motor Single phase AC, 220-240V 50Hz, 4 pole, 1415 rpm Power 940 W (4.15 A) Noise 60 dB(A) at 3m IP rating IP55 Warranty 1 Year Manufacturer Airflow at 200 Pa 7204 m³/h Case length (dimension C) 400mm Flange 645mm OD, 12 holes 12mm on 620mm PCD Weight 45 kg Overall efficiency 41.6% (FMEG N 48) Wiring diagram 152-502 Ambient temperature -20°C to +54°C Casing Hot dip galvanised steel Manuals & Guides Elta Revolution SLC Datasheet Elta Revolution SLC Installation Manual