SCP560 4 1AC Compact Plate Axial Fan Single Phase AC 560mm

The Elta SCP560/4-1AC is a 560mm Compact SCP plate mounted axial fan with a single phase 4 pole AC motor, moving up to 12056 m³/h in free air and working against static pressures up to 150 Pa. It is built for moving large volumes of air against low resistance, straight through a wall, panel or bulkhead.The 220-240V induction motor runs at 1315 rpm with greased for life ball bearings, drawing 920 W and 4.90 A. The Series 1 impeller has adjustable pitch GRP aerofoil blades, the mild steel plate and motor are powder coated and the guards epoxy coated, an IP55 terminal box is fitted on 550mm of flexible conduit, and Elta give a 12 month warranty. 1 Phase AC Motor Up to 12056 m³/h Speed Controllable What it is best used forThrough-wall extract or supply on a single phase supply in warehouses, distribution sheds, factories, sports halls and large industrial units, often as a bank of fans along one wall. At 12056 m³/h it gives about 6 air changes an hour in a space of roughly 1984 m³, for example 31m x 16m with a 4m ceiling.It is a low pressure fan. The datasheet shows airflow only up to 150 Pa, so it is the wrong choice for ducted systems or heavy louvres; use a cased axial or inline mixed flow fan there. When speed controlled Elta limit the air temperature to +50°C (+70°C at fixed speed), and it is not suitable for corrosive or explosive atmospheres.Why choose this over alternativesIf you have a three phase supply, the Elta SCP560/4-3AC is the same size (11959 m³/h, up to 100 Pa, 951 W, 60 dB(A)). The single phase Elta SCP560-1EC uses an EC motor with built in speed control and gives 10739 m³/h, up to 250 Pa, 932 W, 67 dB(A), so it suits sites that need more pressure or BMS control. Elta's Raptor Elta SPA560/4-1AC is the alternative 560mm single phase plate fan with a Ziehl-Abegg impeller (12578 m³/h, up to 200 Pa, 1.15 kW, 63 dB(A)).Installation notes Mount the 725 x 725mm fan plate securely at any angle using the four 10mm holes on 670mm centres. Make sure the structure can carry its 24 kg and leave access for maintenance. The motor is prewired to an IP55 terminal box on 550mm of 20mm flexible conduit. Wire to Elta diagram 152-500 and make all earth connections; the thermal cut-out must be wired into the starter or controller control circuit. For speed control Elta list the 149-TC18 five step transformer controller (8 A). Diagram 152-500 also shows connection to the 149-EL31TK and 149-EL61TK electronic controllers; choose one rated above the motor current. Fit a local means of isolation, but do not use the isolator for day to day on and off control. Elta warn this shortens motor life; use a controller or switch instead. At first start check rotation, airflow direction and that the running current does not exceed the rating plate. Inspect and clean blades and guards at least every 12 months. You'll also need Elta 149-TC18 five step transformer controller (8 amp) for speed control. Elta 064-0560-C louvre shutter available to order, ask us Elta 078-0560-C impeller side guard available to order, ask us Elta SWC56/63 wall cowl available to order, ask us Browse more plate axial fans, axial fans or Elta fans, or call us for help choosing the right fan.Specifications Model SCP560/4-1AC Type Plate mounted axial fan Diameter 560mm Max airflow 12056 m³/h Static pressure 150 Pa Motor Single phase AC, 220-240V 50Hz, 4 pole, 1315 rpm Power 920 W (4.90 A) Noise 58 dB(A) at 3m IP rating IP55 terminal box Warranty 1 Year Manufacturer Airflow at 50 Pa 10904 m³/h Airflow at 100 Pa 9450 m³/h Airflow at 150 Pa 7488 m³/h Overall efficiency 34.4% FMEG 41 Plate size 725 x 725mm Fixing centres 670mm, 4 holes 10mm Weight 24 kg Operating temperature -20°C to +70°C fixed speed, -20°C to +50°C speed controlled Wiring diagram 152-500 Manuals & Guides Elta Compact SCP Datasheet Elta Compact SCP Installation Manual