SCP560 1EC Compact Plate Axial Fan Single Phase EC 560mm

The Elta SCP560-1EC is a 560mm Compact SCP plate mounted axial fan with a single phase EC motor, moving up to 10739 m³/h at full speed and working against static pressures up to 250 Pa. Speed is fully variable, so one fan can be set to the duty you need.The IE5 efficiency EC motor has an integrated variable speed drive, runs on 220-277V 50/60Hz and reaches 1810 rpm at 10V, drawing 932 W and 7.55 A. Speed is set by a 2-10V DC signal, 4-20mA, a PWM signal (10-95%) or a potentiometer. The Series 1 impeller has adjustable pitch GRP aerofoil blades, an IP55 terminal box is fitted on trailing leads, and Elta give a 12 month warranty. 1 Phase EC Motor Up to 10739 m³/h Speed Controllable What it is best used forThrough-wall ventilation that needs variable or BMS controlled speed on a single phase supply in warehouses, distribution sheds, factories, sports halls and large industrial units, often as a bank of fans along one wall. At 10739 m³/h it gives about 6 air changes an hour in a space of roughly 1800 m³, for example 30m x 15m with a 4m ceiling. Turned down to 8V it still moves 8460 m³/h at 60 dB(A).Its pressure (up to 250 Pa on the datasheet) is high for a plate fan, but it is still not a ducted fan for long runs; use a cased axial or inline mixed flow fan there. EC fans are rated for air up to +60°C, and it is not suitable for corrosive or explosive atmospheres.Why choose this over alternativesAgainst the single phase AC Elta SCP560/4-1AC (12056 m³/h, up to 150 Pa, 920 W, 58 dB(A)), this EC version needs no separate transformer controller and gives stepless control from a BMS signal. The three phase Elta SCP560/4-3AC gives 11959 m³/h, up to 100 Pa, 951 W, 60 dB(A). At reduced speed EC power falls sharply, which is where it saves running cost over a fixed speed AC fan.Installation notes Mount the 725 x 725mm fan plate securely at any angle using the four 10mm holes on 670mm centres, and leave access for maintenance. Supply is 220-277V single phase 50/60Hz. Wire to Elta diagram 152-711. The fitted 149-CD-POT commissioning trimmer sets the maximum speed; remove its jumper when using an external 149-POT-10-MI potentiometer, 2-10V, 4-20mA or PWM signal. Keep control cables within Elta's limits: 10m for a voltage or PWM signal, 300m for 4-20mA. Allow at least 5 minutes between starts from the mains supply, and do not use the isolator for day to day control. High voltage can remain in the motor for up to 10 minutes after isolation. At first start check rotation and airflow direction. Inspect and clean blades and guards at least every 12 months. You'll also need Elta EC electronic controller 149-POT-10-MI for manual speed control. Elta 064-0560-C louvre shutter available to order, ask us Elta 078-0560-C impeller side guard available to order, ask us Elta SWC56/63 wall cowl available to order, ask us Browse more plate axial fans, axial fans or Elta fans, or call us for help choosing the right fan.Specifications Model SCP560-1EC Type Plate mounted axial fan, EC Diameter 560mm Max airflow 10739 m³/h Static pressure 250 Pa Motor Single phase EC (IE5), 220-277V 50/60Hz, 1810 rpm at 10V Power 932 W (7.55 A) Noise 67 dB(A) at 3m IP rating IP55 terminal box Warranty 1 Year Manufacturer Speed control 2-10V, 4-20mA, PWM 10-95% or 149-POT-10-MI potentiometer Airflow at 50 Pa 10094 m³/h Airflow at 100 Pa 9454 m³/h Airflow at 150 Pa 8762 m³/h Airflow at 200 Pa 7931 m³/h Airflow at 250 Pa 6563 m³/h Airflow at 8V 8460 m³/h, 60 dB(A) Airflow at 5V 4734 m³/h, 47 dB(A) Overall efficiency 54.3% FMEG 60 Plate size 725 x 725mm Fixing centres 670mm, 4 holes 10mm Weight 24 kg Wiring diagram 152-711 Manuals & Guides Elta Compact SCP Datasheet Elta Compact SCP Installation Manual