SCP400 4 3AC Compact Plate Axial Fan Three Phase AC 400mm

The Elta SCP400/4-3AC is a 400mm Compact SCP plate mounted axial fan with a three phase 4 pole AC motor, moving up to 5238 m³/h in free air and working against static pressures up to 100 Pa. It is built for moving large volumes of air against low resistance through a wall, panel or bulkhead.The 380-415V induction motor runs at 1400 rpm with greased for life ball bearings, drawing 328 W and 0.68 A. The Series 1 impeller has adjustable pitch GRP aerofoil blades, the mild steel plate and motor are powder coated and the guards epoxy coated, an IP55 terminal box is fitted on 550mm of flexible conduit, and Elta give a 12 month warranty. 3 Phase AC Motor Up to 5238 m³/h Speed Controllable What it is best used forThrough-wall extract or supply on three phase sites in workshops, school halls, commercial kitchens with little or no ducting, vehicle garages and small industrial units. At 5238 m³/h it gives about 6 air changes an hour in a space of roughly 880 m³, for example 22m x 10m with a 4m ceiling.It is a low pressure fan. The datasheet shows airflow only up to 100 Pa, so it is the wrong choice for ducted systems or heavy louvres; use a cased axial or inline mixed flow fan there. When speed controlled Elta limit the air temperature to +50°C (+70°C at fixed speed), and it is not suitable for corrosive or explosive atmospheres.Why choose this over alternativesThe single phase Elta SCP400/4-1AC is the same size (2578 m³/h, up to 100 Pa, 121 W, 50 dB(A)), for sites without three phase. For built in speed control without an inverter, the Elta SCP400-1EC gives 4108 m³/h, up to 150 Pa, 262 W, 60 dB(A). Elta's Raptor Elta SPA400/46-3AC is the three phase alternative with a Ziehl-Abegg impeller and a star/delta second speed (3856 m³/h, up to 100 Pa, 227 W, 48 dB(A) on high speed).Installation notes Mount the 540 x 540mm fan plate securely at any angle using the four 10mm holes on 490mm centres. Make sure the structure can carry its 13 kg and leave access for maintenance. Wire to Elta diagram 152-611 through the IP55 terminal box on 550mm of 20mm flexible conduit. The thermal cut-out must be wired into the starter control circuit. For variable speed Elta list the 149-TC33 five step transformer controller or an Eltadrive inverter (149-ODE3-14075-3KA1B 3 phase to 3 phase, or 149-ODE3-12037-1KB1B from a single phase supply). Fuses and circuit breakers only give short circuit protection, so Elta advise a starter with overload protection. Do not use the isolator for day to day on and off control, as it shortens motor life. At first start check rotation (swap any two supply phases to reverse it) and that the running current does not exceed the rating plate. Inspect and clean blades and guards at least every 12 months. You'll also need Elta 149-TC33 three phase transformer controller (3 amp) available to order, ask us Elta 149-ODE3-14075-3KA1B Eltadrive inverter (3 phase to 3 phase, IP66) available to order, ask us Elta 064-0400-C louvre shutter available to order, ask us Elta 078-0400-C impeller side guard available to order, ask us Elta SWC35/40 wall cowl available to order, ask us Browse more plate axial fans, axial fans or Elta fans, or call us for help choosing the right fan.Specifications Model SCP400/4-3AC Type Plate mounted axial fan Diameter 400mm Max airflow 5238 m³/h Static pressure 100 Pa Motor Three phase AC, 380-415V 50Hz, 4 pole, 1400 rpm Power 328 W (0.68 A) Noise 51 dB(A) at 3m IP rating IP55 terminal box Warranty 1 Year Manufacturer Airflow at 50 Pa 4565 m³/h Airflow at 100 Pa 3557 m³/h Overall efficiency 31.5% FMEG 40 Plate size 540 x 540mm Fixing centres 490mm, 4 holes 10mm Weight 13 kg Operating temperature -20°C to +70°C fixed speed, -20°C to +50°C speed controlled Wiring diagram 152-611 Manuals & Guides Elta Compact SCP Datasheet Elta Compact SCP Installation Manual