SCD500 Cased Axial Fan Single Phase AC 500mm

The Elta SCD500/4-1AC is a 500mm Compact SCD cased axial fan with a short 250mm case, built for moving large volumes of air against low resistance. It moves up to 7128 m³/h at free air and 4608 m³/h against 100 Pa, from a 4 pole single phase AC motor running at 1295 rpm.The mild steel casing is powder coated in Telegrey 1 (RAL 7045) with the motor and adjustable pitch aerofoil impeller held within its length, and an IP55 terminal box is fitted as standard. The single phase TENV motor is Class F insulated with integral thermal overload protection and IP55 rated. Speed control is by a 149-TC18 transformer controller. It is rated for air from -20°C to +70°C at fixed speed (+50°C with a speed controller) and Elta give a 12 month warranty. 1 Phase AC Motor Up to 7128 m³/h Speed Controllable What it is best used forMoving a lot of air against low resistance on a single phase supply: workshops, industrial units, warehousing and sports facilities, mounted in a duct run or on a wall. It moves 7128 m³/h at free air on 0.411 kW, at 56 dB(A) at 3m.Its table stops at 100 Pa (4608 m³/h), so keep duct runs short and avoid filters or attenuators in the line; for more pressure, choose a long cased SLC.Why choose this over alternativesThe three phase Elta SCD500/4-3AC moves 7715 m³/h at free air at the same size. Choose this single phase model where three phase is not available.Against the long cased Elta SLC500/4A-1AC (7427 m³/h, to 150 Pa), the SCD is a much shorter and lighter fan (250mm case, 21 kg) with a powder coated finish, and costs less. Choose the SLC for higher pressure, external mounting (it is hot dip galvanised and rated for outdoor use as standard) or heavier industrial duty. Need more air? The Elta SCD560/4-1AC moves 11592 m³/h.Installation notes The fan is short (250mm) and light (21 kg), so it fits in a duct run or on a wall where space is tight. Mounting feet and AV mounts are available from Elta. The flanges are 567mm outside diameter with 12 holes of 10mm on a 541mm PCD. Use Elta matching flanges and flexible connectors to join it to ductwork. Wire to diagram 152-500 for 220-240V single phase via the fitted IP55 terminal box (21mm cable entry). The motor has integral thermal overload protection. If you run it on a speed controller, keep the air temperature at or below +50°C (Elta's limit with a controller); at fixed speed it is rated to +70°C. You'll also need Elta matching flanges 061A-0500-C (sold each, one per ducted side; available to order, ask us) Elta 149-TC18 transformer speed controller (the controller Elta list for this model) Elta APK500SCD/002 ancillary pack (flexible connections, matching flanges, AV mounts and mounting feet in one code; available to order, ask us) Elta SWC45/50 wall cowl (for wall mounted installs; available to order, ask us) Browse more cased axial fans, axial fans or Elta fans, or call us for help choosing the right fan.Specifications Model SCD500/4-1AC Type Compact cased axial fan Diameter 500mm Max airflow 7128 m³/h Static pressure 100 Pa Motor Single phase AC, 220-240V 50Hz, 4 pole, 1295 rpm Power 411 W (1.97 A) Noise 56 dB(A) at 3m IP rating IP55 Warranty 1 Year Manufacturer Airflow at 100 Pa 4608 m³/h Case length (dimension C) 250mm Flange 567mm OD, 12 holes 10mm on 541mm PCD Weight 21 kg Overall efficiency 31.2% (FMEG N 40) Wiring diagram 152-500 Air temperature -20°C to +70°C fixed speed, +50°C speed controlled Casing Powder coated mild steel, RAL 7045 Manuals & Guides Elta Compact SCD Datasheet