SCD350 Cased Axial Fan Three Phase AC 350mm

The Elta SCD350/4-3AC is a 350mm Compact SCD cased axial fan with a short 180mm case, built for moving large volumes of air against low resistance. It moves up to 2239 m³/h at free air and 1555 m³/h against 75 Pa, from a 4 pole three phase AC motor running at 1435 rpm.The mild steel casing is powder coated in Telegrey 1 (RAL 7045) with the motor and adjustable pitch aerofoil impeller held within its length, and an IP55 terminal box is fitted as standard. The three phase TENV motor is IP55, multi voltage (star 400V as supplied, or delta 230V three phase) and suits the Eltadrive inverter range or a 149-TC33 transformer controller. It is rated for air from -20°C to +70°C at fixed speed (+50°C with a speed controller) and Elta give a 12 month warranty. 3 Phase AC Motor Up to 2239 m³/h Speed Controllable What it is best used forMoving a lot of air against low resistance on a three phase supply: plant rooms, small kitchens, shops and stores, mounted in a duct run or on a wall. It moves 2239 m³/h at free air on 0.124 kW, at 52 dB(A) at 3m.Its table stops at 75 Pa (1555 m³/h), so keep duct runs short and avoid filters or attenuators in the line; for more pressure, choose a long cased SLC.Why choose this over alternativesThe single phase Elta SCD350/4-1AC moves 2502 m³/h at the same size. Choose this three phase model where you have a three phase supply and want inverter control, as Elta rate the three phase motor for use with the Eltadrive range.Against the long cased Elta SLC355/4-3AC (1807 m³/h, to 75 Pa), the SCD is a much shorter and lighter fan (180mm case, 10 kg) with a powder coated finish, and costs less. Choose the SLC for external mounting (it is hot dip galvanised and rated for outdoor use as standard) or heavier industrial duty. Need more air? The Elta SCD400/4-3AC moves 4993 m³/h.Installation notes The fan is short (180mm) and light (10 kg), so it fits in a duct run or on a wall where space is tight. Mounting feet and AV mounts are available from Elta. The flanges are 421mm outside diameter with 8 holes of 10mm on a 395mm PCD. Use Elta matching flanges and flexible connectors to join it to ductwork. Supplied star (Y) connected for 400V three phase, wiring diagram 152-611, via the fitted IP55 terminal box (21mm cable entry). The motor can be reconnected to delta for 230V three phase from an inverter. If you run it on a speed controller, keep the air temperature at or below +50°C (Elta's limit with a controller); at fixed speed it is rated to +70°C. You'll also need Elta matching flanges 061A-0350-C (sold each, one per ducted side; available to order, ask us) Elta 149-TC33 three phase transformer speed controller (available to order, ask us) Eltadrive 149-ODE3-14075-3KA1B inverter for a three phase supply (or 149-ODE3-12037-1K1B from single phase; available to order, ask us) Elta APK350SCD/001 ancillary pack (flexible connections, matching flanges, AV mounts and mounting feet in one code; available to order, ask us) Elta SWC35/40 wall cowl (for wall mounted installs; available to order, ask us) Browse more cased axial fans, axial fans or Elta fans, or call us for help choosing the right fan.Specifications Model SCD350/4-3AC Type Compact cased axial fan Diameter 350mm Max airflow 2239 m³/h Static pressure 75 Pa Motor Three phase AC, 380-415V 50Hz, 4 pole, 1435 rpm Power 124 W (0.34 A) Noise 52 dB(A) at 3m IP rating IP55 Warranty 1 Year Manufacturer Airflow at 75 Pa 1555 m³/h Case length (dimension C) 180mm Flange 421mm OD, 8 holes 10mm on 395mm PCD Weight 10 kg Overall efficiency 26.2% Motor connection Star (Y) Wiring diagram 152-611 Air temperature -20°C to +70°C fixed speed, +50°C speed controlled Casing Powder coated mild steel, RAL 7045 Manuals & Guides Elta Compact SCD Datasheet