SB400 CON2 3 Biflow Bifurcated Conical Axial Fan Three Phase AC 400mm

The Elta SB400-CON2-3 is a 400mm Biflow SB bifurcated conical axial fan. The motor sits in a tunnel outside the airstream, so the fan can move air at up to +200°C, or air carrying grease or dust, without that air passing over the motor. It moves up to 7495 m³/h in free air, 7236 m³/h at 100 Pa and 5497 m³/h at 500 Pa, the highest pressure in Elta's published table for this model.A 2 pole three phase AC motor (380-415V 50Hz) runs at 2800 rpm with a 2.2 kW output and 4.42 A peak current. It is a foot mounted, totally enclosed IP55 motor with Class H insulation and sealed for life bearings. The adjustable pitch aerofoil impeller has pressure die cast aluminium blades, the steel casing is hot dip galvanised after fabrication and suitable for external mounting, and Elta give a 12 month warranty. 3 Phase AC Motor Up to 7495 m³/h Speed Controllable What it is best used forHigh volume hot or contaminated extract on 400mm duct: large commercial kitchen canopies, boiler houses, spray booths, foundry or heavy industrial process extract, and hot gas duties up to +200°C. At 100 Pa it moves 7236 m³/h.It is not rated for explosive atmospheres, so it is the wrong fan for ATEX zones, and Elta's manual also excludes corrosive atmospheres, so talk to us before using it on aggressive fumes. The motor must sit in ambient air between -20°C and +54°C even when the airstream is much hotter.Why choose this over alternativesIn the 400mm size there is also the Elta SB400-CYL4-3 (4 pole three phase cylindrical, 3636 m³/h, 55 dB(A)). As a two pole fan running at 2800 rpm this one holds its airflow against far more resistance (5497 m³/h at 500 Pa), but it is also the louder option at 70 dB(A) at the inlet.A bifurcated fan costs more than a standard cased axial because the motor has its own tunnel and Class H insulation. If the air is clean and below +70°C, a standard cased axial fan does the job for less money; choose the Biflow when heat, grease or dust would shorten a normal motor's life.Installation notes Mount it at any angle, adequately supported, with access for maintenance. Do not obstruct the motor tunnel, as the motor relies on ambient air through it for cooling. The case is 650mm long with 8 holes of 12mm on a 450mm PCD at each end, matching Elta 061B-0400 flanges. Use Elta's high temperature 063-0400-PU250 flexible connectors for hot air duties. Wire to Elta diagram 152-616. Fuses and breakers give short circuit protection only, so fit a starter with overload protection; for variable speed Elta show the fan run from an inverter. Fit a local means of isolation, check rotation and airflow direction at first start, and inspect and clean the impeller at least every 12 months. You'll also need Elta matching flanges 400mm (061B-0400, the flanges Elta list for the Biflow SB) Elta ancillary pack APK400SBCON/003 (flexible connections, matching flanges, anti-vibration mounts and mounting feet) available to order, ask us Elta bell mouth inlet 241B-0400-BELL and impeller side guard 078C-0400-C available to order, ask us Browse more high temperature fans, commercial kitchen extract fans or Elta fans, or call us for help choosing the right fan.Specifications Model SB400-CON2-3 Type Bifurcated conical axial fan, motor out of airstream Diameter 400mm Max airflow 7495 m³/h Static pressure 500 Pa Motor Three phase AC, 380-415V 50Hz, 2 pole, 2800 rpm, IP55, Class H Power 2.2 kW output (4.42 A peak) Noise 70 dB(A) inlet at 3m Air temperature -20°C to +200°C in the airstream Warranty 1 Year Manufacturer Airflow at 100 Pa 7236 m³/h Airflow at 200 Pa 6934 m³/h Airflow at 300 Pa 6570 m³/h Airflow at 400 Pa 6113 m³/h Motor ambient -20°C to +54°C, up to 95% RH Impeller Adjustable pitch aerofoil, die cast aluminium blades Casing Steel, hot dip galvanised after fabrication Case 650mm long, 400mm internal diameter, 485mm flange diameter Flange fixings 8 holes 12mm on 450mm PCD Weight 49 kg Wiring diagram 152-616 ErP Exempt Manuals & Guides Elta Bifurcated Axial Fans Catalogue