SB315 CON4 1 Biflow Bifurcated Conical Axial Fan Single Phase AC 315mm

The Elta SB315-CON4-1 is a 315mm Biflow SB bifurcated conical axial fan. The motor sits in a tunnel outside the airstream, so the fan can move air at up to +200°C, or air carrying grease or dust, without that air passing over the motor. It moves up to 1876 m³/h in free air and 925 m³/h at 100 Pa, the highest pressure in Elta's published table for this model.A 4 pole single phase AC motor (220-240V 50Hz) runs at 1370 rpm with a 120 W output and 1.13 A peak current. It is a foot mounted, totally enclosed IP55 motor with Class H insulation and sealed for life bearings. The adjustable pitch aerofoil impeller has pressure die cast aluminium blades, the steel casing is hot dip galvanised after fabrication and suitable for external mounting, and Elta give a 12 month warranty. 1 Phase AC Motor Up to 1876 m³/h Fixed Speed What it is best used forHot or contaminated extract on 315mm duct where a standard axial would cook its motor: a small commercial kitchen canopy, a boiler house, a spray booth or a process area with a short duct run. At 50 Pa it moves 1580 m³/h.It is not rated for explosive atmospheres, so it is the wrong fan for ATEX zones, and Elta's manual also excludes corrosive atmospheres, so talk to us before using it on aggressive fumes. Elta publish airflow only up to 100 Pa for this model, so keep the duct short and simple or step up to a two pole model. This single phase version is fixed speed.Why choose this over alternativesIn the 315mm size there is also the Elta SB315-CON2-3 (2 pole three phase conical, 3352 m³/h, 64 dB(A)) and the Elta SB315-CON4-3 (4 pole three phase conical, 1876 m³/h, 51 dB(A)). This is the single phase option for sites without a three phase supply; the four pole motor keeps it quiet at 51 dB(A) at the inlet.A bifurcated fan costs more than a standard cased axial because the motor has its own tunnel and Class H insulation. If the air is clean and below +70°C, a standard cased axial fan does the job for less money; choose the Biflow when heat, grease or dust would shorten a normal motor's life.Installation notes Mount it at any angle, adequately supported, with access for maintenance. Do not obstruct the motor tunnel, as the motor relies on ambient air through it for cooling. The case is 500mm long with 8 holes of 10mm on a 355mm PCD at each end, matching Elta 061B-0315 flanges. Use Elta's high temperature 063-0315-PU250 flexible connectors for hot air duties. Wire to Elta diagram 152-521 (fixed speed, capacitor run). Fuses and breakers give short circuit protection only, so fit a starter with overload protection. Fit a local means of isolation, check rotation and airflow direction at first start, and inspect and clean the impeller at least every 12 months. You'll also need Elta matching flanges 315mm (061B-0315, the flanges Elta list for the Biflow SB) Elta ancillary pack APK315SBCON/003 (flexible connections, matching flanges, anti-vibration mounts and mounting feet) available to order, ask us Elta bell mouth inlet 241B-0315 and impeller side guard 078C-0315-C available to order, ask us Browse more high temperature fans, commercial kitchen extract fans or Elta fans, or call us for help choosing the right fan.Specifications Model SB315-CON4-1 Type Bifurcated conical axial fan, motor out of airstream Diameter 315mm Max airflow 1876 m³/h Static pressure 100 Pa Motor Single phase AC, 220-240V 50Hz, 4 pole, 1370 rpm, IP55, Class H Power 120 W output (1.13 A peak) Noise 51 dB(A) inlet at 3m Air temperature -20°C to +200°C in the airstream Warranty 1 Year Manufacturer Motor ambient -20°C to +54°C, up to 95% RH Impeller Adjustable pitch aerofoil, die cast aluminium blades Casing Steel, hot dip galvanised after fabrication Case 500mm long, 315mm internal diameter, 380mm flange diameter Flange fixings 8 holes 10mm on 355mm PCD Weight 30 kg Wiring diagram 152-521 ErP Exempt Manuals & Guides Elta Bifurcated Axial Fans Catalogue