Zenmuse L2

Zenmuse L2 – High-Precision Aerial LiDAR System Zenmuse L2 integrates frame LiDAR a self-developed high-accuracy IMU system and a 4/3 CMOS RGB mapping camera providing DJI flight platforms with more precise efficient and reliable geospatial data acquisition. When used with DJI Terra it delivers a turnkey solution for 3D data collection and high-accuracy post-processing. 30% Detection Range Increase L2 can detect from 250 meters at 10% reflectivity and 100 klx and up to 450 meters at 50% reflectivity and 0 klx. The typical operational altitude now extends up to 120 meters notably enhancing operational safety and efficiency. Smaller Laser Spots Denser Point Clouds With a reduced spot size of 4×12 cm @100m only a fifth of that of L1 L2 not only detects smaller objects with more details but can also penetrate denser vegetation generating more accurate digital elevation models (DEM). Supports 5 Returns In densely vegetated areas L2 can capture more ground points beneath the foliage. Effective Point Cloud Rate 240000 pts/s In both single and multiple return modes L2 can reach a max point cloud emission rate of 240000 points per second allowing the acquisition of more point cloud data in a given time frame. Two Scanning Modes L2 supports two scanning modes offering flexibility for users based on their task demands. In repetitive scanning mode L2’s LiDAR can achieve more uniform and accurate point clouds while meeting high-precision mapping requirements. In non-repetitive scanning mode it offers deeper penetration for more structural information making it suitable for power line inspection forestry surveying and other scenarios. Frame-based Design The frame-based design results in an effective point cloud data rate of up to 100%. Together with a three-axis gimbal it brings more possibilities to surveying scenarios. . What Stands Out . High Precision - Vertical Accuracy 4 cm; Horizontal Accuracy 5cm . Exceptional Efficiency - 2.5 km2 covered in a single flight . Super Penetration - Smaller laser spots denser point clouds . Detection Range - 250m @10% reflectivity 100klx; 450m @50% reflectivty 0klx . 5 returns . Turnkey Solution . Point Cloud LiveView Compatible drones DJI M350 with DJI RC Plus controller . DJI Matrice 300 with RC Plus controller . Please note to use the DJI L2 with the DJI Matrice 300 you will need the DJI RC Plus controller (Sold separately). You will not be able to use the original remote controller that comes with the DJI Matrice 300 after updating the firmware to enable the use of the DJI Matrice 300 with the DJI L2 payload.. .