Ski Trousers Fr500

Waterproof:15,000 mm membrane (Schmerbers) and taped seams, waterproof zipBreathability:The membrane, placed heat pads and ventilation help wick away perspirationFreedom of movement:Loose fit and stretch component that follow all your movementsWarmth:Glued warm pads (100 g/sqm wadding) protect you moderately where neededLimits snow entering:Gaiter at the hem of the trousers. High elasticated waistband for good protectionPockets:Two thigh pockets, including one mesh pocket for a phone or avalanche transceiverVentilation:2 wide vents along the thigh to reduce the temperature after your runsEasy spotting:Recco system to facilitate the search in the event of an avalanche. Warmth and breathability technology: Placed heat pads to provide good thermal protection during your freeriding outings. This technology reserves a large area where the 3-layer membrane component can eliminate your perspiration more effectively. A perfect compromise between completely padded trousers and 3 layer trousers with no extra warmth. Warmth and modularity support you on your Freeride runs throughout the season. Additional features: Wide elasticated waistband to guarantee: perfect airtightness against draughts and snow, perfect support and constant, regular warmth in the lower back. Ventilation: To stay dry, it is important to wear waterproof trousers. But you shouldn't end up wet with perspiration. The vents play an important role in wicking away perspiration. This is why we equipped these trousers with 2 zipped air vents and two large zips under the arms (28 cm in size L). Water repellency: The water-repellent property of a fabric is its ability to make water run off its surface without absorbing it. This prevents the fabric from becoming waterlogged and remains light, breathable and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment (we recommend every 3 washes). All Wedze jackets have received a water-repellent treatment. Component waterproofing: The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a waterproof rating of 10,000 mm is therefore resistant to the pressure exerted by 15,000 mm of water Breathability of a component: To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity can escape and the higher the fabric's breathability. For example: RET 20 = little or no breathability. What is a membrane or coated component?: The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. It is often less expensive than a membrane and requires a liner to protect it. The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more durable and often more breathable than a coating. How do we make a garment waterproof?: The waterproof properties of the garment are related to its fabric, seam sealing and assembly design. We then carry out shower tests on our garments. Waterproofness/Shower test: This garment has been validated in a shower test under 100 L of water / sqm / hour for 3 hours. This test reproduces the conditions of a heavy mountain storm. How do we make a garment breathable?: In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity. Your product is repairable: This product is repairable. We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store. If, however, we cant repair your product (non-repairable production defect), you can exchange it or get a refund. What is the RECCO system?: All our Freeride and All-Mountain jackets and trousers are equipped with the RECCO system. With RECCO technology, you can be located in the event of an avalanche. Someone who is equipped with RECCO reflectors and is buried in the snow can be quickly and accurately located by the emergency services using the RECCO tracker. RECCO reflectors are not a substitute for an AVD. The RECCO technology works as a complementary measure, increasing the chances of being found in time. Tutorial on how to wash your waterproof garment: We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment