Catalyst WS C2960X 48FPS L Managed L2 L3 Gigabit Ethernet (10 10

Cisco® Catalyst® 2960-X Series Switches are fixed-configuration. stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1). Designed for operational simplicity to lower total cost of ownership. they enable scalable. secure and energy-efficient business operations with intelligent services and a range of advanced Cisco IOS® Software features.Product HighlightsCisco Catalyst 2960-X switches feature:- 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance- Gigabit Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks- FlexStack Plus for stacking of up to 8 switches with 80 Gbps of stack throughput (optional)- Power over Ethernet Plus (PoE+) support with up to 740W of PoE budget- 24-port PoE fanless switch for deployment outside the wiring closet- Reduced power consumption and advanced energy management features- USB and Ethernet management interfaces for simplified operations- Application visibility and capacity planning with integrated NetFlow-Lite- LAN Base or LAN Lite Cisco IOS® software features- Enhanced limited lifetime warranty (E-LLW) offering next-business-day hardware replacementCisco Catalyst 2960-XR models also offer:- Power resiliency with optional dual field-replaceable power supplies- IP Lite Cisco IOS® software with dynamic routing and Layer 3 featuresSwitch Models and ConfigurationsCatalyst 2960-X switches include a single fixed power supply and are available with either the Cisco IOS LAN Base or LAN Lite feature set. Catalyst 2960-XR switch models include a field-replaceable modular power supply and can accommodate a second power supply. Catalyst 2960-XR is available only with the Cisco IOS IP Lite feature set.Catalyst 2960-X series Software FeaturesAll Catalyst 2960-X Series Switches use a single Universal Cisco IOS Software Image for all SKUs. Depending on the switch model. the Cisco IOS image automatically configures the LAN Lite. LAN Base. or IP Lite feature set.LAN Lite models have reduced functionality and scalability for small deployments with basic requirements. Cisco Catalyst 2960-X Family of Switches are available with the LAN Base and LAN Lite feature sets and Catalyst 2960-XR Family of switches are available IP Lite feature sets.Note that each switch model is tied to a specific feature level; LAN Lite cannot be upgraded to LAN Base and LAN Base cannot be upgraded to IP Lite.Cisco Catalyst 2960-XR IP-Lite High-Performance RoutingThe Cisco hardware routing architecture delivers extremely high-performance IP routing in the Cisco Catalyst 2960-XR IP-Lite Switches:- IP unicast routing protocols (Static. Routing Information Protocol Version 1 [RIPv1]. RIPv2. RIPng. and EIGRP-Stub) are supported for network routing applications.- Advanced IP unicast routing protocols (OSPF for Routed Access) are supported for load balancing and constructing scalable LANs. IPv6 routing (OSPFv3) is supported in hardware for maximum performance.- EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite.- Equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.- Policy-based routing (PBR) allows superior control by facilitating flow redirection regardless of the routing protocol configured (for both IPv4 and IPv6).- Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) provides dynamic load balancing and failover for routed links.- Protocol Independent Multicast (PIM) for IP multicast is supported. including PIM sparse mode (PIM-SM). PIM dense mode (PIM-DM). PIM sparse-dense mode and Source Specific Multicast (SSM).Network SecurityThe Cisco Catalyst 2960-X Series Switches provide a range of security features to limit access to the network and mitigate threats. including:- MAC-based VLAN assignment enables different users to authenticate on different VLANs. This feature enables each user to have a different data VLAN on the same interface.- Cisco TrustSec uses SXP to simplify security and policy enforcement throughout the network. For more information about Cisco TrustSec security solutions. visit cisco.com/go/TrustSec.- Comprehensive 802.1X Features to control access to the network. including Flexible Authentication. 802.1x Monitor Mode. and RADIUS Change of Authorization.- IPv6 First-Hop Security enhances Layer-2 and Layer-3 network access from proliferating IPv6 devices especially BYOD devices. It protects against rogue router advertisements. address spoofing. fake DHCP replies and other risks introduced by IPv6 technology.- Device Sensor and Device Classifier enable seamless versatile device profiles including BYOD devices. They also enable Cisco Identity Services Engine (ISE) to provision identity based security policies. This feature is available on both the 2960-X and the 2960-XR product families.- Cisco Trust Anchor Technology enables easy distribution of a single universal image for all models of Catalyst 2960-X by verifying the authenticity of IOS