PVC Hot Water Bottle Alvita®

PVC Hot Water Bottle - Latex and Phthalate Free This partially filled hot water bottle is made of phthalate-free PVC and is suitable for those with latex allergies. | How to use Do not fill the bag with boiling water. Allow the water to cool for 5 to 10 minutes. Fill to ⅔ or less of capacity. Do not overfill the bag as this may cause it to burst. Hold the bag upright by your neck, filling slowly and carefully to prevent the hot water from splashing back. Release air from the bag by carefully tilting it up una flat surface, until water is visible at the opening. Screw the cap on tight enough to ensure no water leaks out. Hand tightening should essere adequate. Finally, make sure that the loading mouth is empty. In case of prolonged contact with the skin, use an adequate covering to prevent burns. Under no circumstances should the hot water bottleessere used as a cushion to sit on.| Warnings Do not fill using hot running water, as this may significantly reduce the life of the product. Avoid contact with hot surfaces, oil or grease. Regularly check that the cap and bag are not damaged or worn. Do not use with children or people who are insensitive to heat (sensitivity to heat can essere compromised by excessive tiredness, certain medications, alcohol, illness, etc.). | Storage When not in use, dry thoroughly and store, without the cap, in a cool, dry and dark place. Avoid exposure to sunlight. Do not place any objects on the bag during storage. | Warranty: 2 years. | Validity of intact packaging: 60 months. | Format 1 piece.